Every Ajax Fiori self-loading concrete mixer in one fleet — from the compact Argo 1000 for tight-access pours to the flagship Argo 4500 for the largest infrastructure programmes. Each machine loads, weighs, mixes and discharges concrete at the pour point with a single operator, and every rental from J.K. Jain Buildtech includes operator and maintenance support. Pick the batch size your project needs.
The Argo 1000 is the most compact machine in the Ajax Fiori self-loading range — around 1 m³ of freshly mixed concrete per batch, produced right at the pour point.
The Argo 2000 is the versatile mid-size machine of the Ajax Fiori range — roughly 2 m³ of mixed concrete per batch, self-loaded and weigh-batched on board.
The Argo 2500 steps the mid-size class up to around 2.5 m³ per batch — extra output for contractors whose daily concrete demand has outgrown the 2 CM class but who still want one nimble, self-contained machine.
The Argo 4000 is the high-volume workhorse of the Ajax Fiori self-loading range — around 4 m³ of weigh-batched, freshly mixed concrete per batch, produced at the pour point by a single machine and one operator.
The Argo 4500 is the flagship of the Ajax Fiori self-loading range — the maximum on-site output in the family at roughly 4.5 m³ of mixed concrete per batch.
01
The loading arm feeds aggregate and cement itself — no loader, no plant, no transit fleet.
02
On-board batching weighs every ingredient for a consistent, controlled mix.
03
4×4 drive takes fresh concrete to sites a transit mixer can never reach.
04
A single trained operator runs the whole cycle — load, mix, drive, discharge.
